Epson XP-631
Supported functions:
Resetting waste ink counters.
Reading waste ink counters.
Changing firmware.
Disabling cartridges (making printer chipless).
Fixing recovery problems.
Congratulations!
You can reset the waste ink counters on your Epson XP-631 printer and resume printing!
Simply download and install the latest version of the utility from our website, purchase a Reset Key, and follow the straightforward instructions provided in the "How to Reset Waste Ink Counters" guide.
Additional information about functions you can perform using WIC Reset Utility:
Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run ink charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NQ10F8 10/08/2015 in service mode.
Change firmware to NQ18G3 18/03/2016 in service mode.
Change firmware to NQ14G6 14/06/2016 in service mode.
Change firmware to NQ08I5 08/05/2018 for fixing recovery problems
in service mode.
Change firmware to NQ10F8 10/08/2015 in normal mode.
Change firmware to NQ18G3 18/03/2016 in normal mode.
Change firmware to NQ14G6 14/06/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update is not possible via network.
Firmware update in the normal mode is not possible if printer is
busy, has errors or cartridges/inks are empty.